Application and Usage Instructions

Apply prior to or during periods of active growth. Early Spring to Early Summer.

Rainfall carries the chemical down into the root zone where it is absorbed by the plant's root system. Results will appear 3-6 weeks after 1/4" to 1/2" of rain.

Do not mow or cut treated plants until they have completely defoliated at least once, or in the case of cedar, have turned completely brown.

When treating regrowth from cut off plants, the regrowth must be at least one year old and the rate of application based on the original plant size.

On soils high in clay and/organic matter, use the higher rates.

  • Red Cedar Trees - apply 1 to 2 pellets for every inch of stem (trunk) diameter. Distribute the pellets uniformly around the trunk, approximately half way between the trunk and the canopy edge.

  • Redberry & Blueberry Cedar - multi-stemmed cedar plants, apply 1 to 2 pellets for every 3 feet of plant height or every 3 feet of canopy diameter, whichever is greater. If plant size requires more than one pellet, space uniformly around the plant approximately half way between the plant's stems and the canopy edge.

  • Mesquite and Huisache - multi-stemmed plants, 2' to 4' tall, use 1 to 2 pellets. For 4' to 6' tall plants, use 2 to 4 pellets. Apply the pellets by hand to the ground at the base of the plant.

  • Mesquite Trees - apply 2 pellets for every inch of stem (trunk) diameter. Distribute the pellets uniformly around the trunk, approximately half way between the plant's stem and the canopy edge.

  • Yucca - apply 1 to 2 pellets directly into the center of the plant or on the ground near the stem. On large plants, apply 2 pellets.

IMPORTANT - Always read and follow label instructions. For more information call us toll free at: 1-877-776-7375

© 2018 PRO-SERVE INC. 3390 WINBROOK DRIVE, MEMPHIS TN 38116